Shelby 289/302 Bare Block
Titu Performance is a Shelby Carrol Engine Co. Distributor
The Shelby Alloy 289 Block is much lighter and stronger than the factory cast iron version. The Shelby 289 block is fully CNC machined. It also will feature a casting number similar to the original 289 HIPO blocks.
The Shelby 289/302 block uses a 351 Windsor oil pan, distributor, and oil pump drive shaft.
Shelby 289 Aluminum Block Technical Features:
| Block Material | AA356,T6 aluminum Blocks is CNC machined |
| Deck Height | 8.2-inch |
| Deck Thickness | 0.750-inch |
| Cylinder bore range | 4.030-inch,std.,to special order 4.155-inch |
| Maximum Stroke | 3.4-inch |
| Displacements up to | 368 cubic inches |
| Cylinder sleeve | Centrifugally cast dry sleeves |
| Cylinder wall | Siamese with dry liners |
| Main bearing cap | Billet steel |
| Main bearing cap bolt configuration | studs;4 splayed bolts on 2-3-4 mains |
| oil sump | Accommodates wet or dry sump oiling systems |
| Head stud diameter | 0.500-inch |
| Bare block weight | 90 pounds, approximately |
$8,269.00Price